Keeping your digital camcorder battery fully charged will
ensure that you can record videos for as long as possible. Your digital
camcorder is a useful device which can capture video. Without power
though, it’s no more useful than a house brick. Charging the battery
inside your camcorder is very simple although the method will depend on
the make and model of camcorder you have.
If you want to keep your camcorder running for even longer you can
purchase a spare battery. The spare battery can be charged and then put
inside your camcorder when the original dies.
- Battery Charger
- Digital Camcorder
Step 1: Reading the Manual
The first thing that you will need to do is read the manual to find
out how to charge the camcorder battery. Every camcorder works
differently. Some camcorders can be charged by plugging the camcorder
directly into a power adapter. The most common method, however, is to
remove the battery and put it in a separate charger.
The separate battery charger is the best option because it makes it
possible to charge spare batteries without putting them inside your
Step 2: Removing the Battery
Open the battery compartment and remove the rechargeable battery.
This is normally held in place with a small clip which will need to be
depressed in order to pull the battery out. If you’re not sure how to
do this then check the manual so that you don’t risk causing harm to
the sensitive battery contacts.
Step 3: Putting the Battery in the Charger
Now place the battery into the battery charger by pressing it into
the slot. Check that the battery is inserted the correct way around so
that you don’t risk causing any harm to the battery. If the battery is
inserted the wrong way round then it can be dangerous as it could
potentially cause the battery to explode.
Step 3: Charging the Battery
Once the battery has been placed in the charger it should then be
plugged into an electrical outlet. The battery will be charged
automatically as soon as the charger is plugged inside.
Step 4: Charged
The indicator light on your battery charger will normally be red or
orange while the battery is charging. When the battery is fully charged
it will normally change to green. However, some battery chargers may
work the other way around. Once the battery is charged it can be
removed from the charger and placed in your camcorder.
Unplug the charger once you have finished charging the batteries.
This will prevent electricity being wasted as most chargers stay on
even when the batteries are charged.
Step 5: Charging Spare Batteries
Spare batteries can then be put inside the charger and charged one
by one. When using your batteries you must ensure that you run them
down fully. Try to avoid charging a half charged battery because this
can make them hold less charge.
Try to use your batteries as quickly as possible. Leaving your
batteries fully charged for a long time can cause damage to your
batteries. Taking care of your batteries carefully will ensure that
they last for as long as possible.
Popular Cameras for High Quality Photos: